Max Cooper's RX-7 Web Site www.maxcooper.com
GalleryParts InformationVendorsMy CarHow-ToLinksSearchContents

 

See my Tools & Materials page for information about what you will need to complete this job.

Also see RobRobinette.com for information about how to perform this procedure. I can only add that you should be thorough and do a good job -- it is a lot of work to take all the stuff apart to fix a hose that you did not install carefully. Unlike some other recommendations you might hear, I suggest that you use factory diagrams from the Mazda dealer (have them print out the vacuum hose parts pages from the microfiche) and the factory manuals to reassemble everything. I have heard other people suggest that you should label everything and reassemble it the same way it was. Sometimes the hoses are not correctly plumbed when you start the job due to some previous service. If you use the diagrams to put it back together you can be sure that it is correct.

 

The information on this page is Copyright 1999-2002 Max Cooper
If you have any questions or comments about this page, send email to: rx7@maxcooper.com